Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

TeesAll ductile iron Tees have gasket bell ends designed to push on to IPS (iron pipe size) plastic pipe. The pipe end must be beveled and lubricated with gasket pipe lube before inserting into the gasket bell end. The vertical ears on the tee are designed to attach joint restraint products. The horizontal ears on the tee are designed to attach spigot end fittings such as SBR reducers or plugs. For more information on installation procedures, please visit

The vertical ears on the reducer are designed to attach joint restraint products

The spigot end of the reducer is factory beveled

The LF90 and LF180 LAT Adapters are designed to insert into a Lateral Tee or Lateral Saddle bell outlet

The vertical ears on the tee are designed to attach joint restraint products

The horizontal ears on the caps are designed to attach spigot end fittings such as SBR reducers or plugs

All standard port valve bodies are constructed of either ductile iron or stainless steel depending upon model

The LX-Series riser extensions spigot end is designed to insert into any Lateral Tee or Lateral Saddle to increase the overall height of the lateral angle valves

X = Cross top

(see Lateral Connections section)

All Stop Waste Valves are constructed of 316-series stainless steel

The LGK Series restraints eliminate the need for thrust blocking

All ductile iron Self-Restrained Repair Couplings do not have a pipe stop and are designed for repairing broken pipe

Exchange/Return Notes