Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Red Coat BlockoutThis product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED COAT on the print side of the screen. Spread over the open areas of the screen until completely filled. II Touch up all defects, including heavy blobs which tend to dry the outside and pop off or smear during printing. Where very fine meshes are used, you

Screen Printing Squeegee - 13 Inch

Two 5" squeegees

GPM @ 15ft

• 20 Micron Filter

The ability to cure at lower temperatures also provides greater control in preventing fabric shrinkage

spraying from the top bottom to top

Light colored 100% cotton or cotton/polyester blends

STARTER KIT INCLUDES:

Adjustable Belt Speed Control

Does not require Reporting to Agencies (not regulated) no hazardous Air Pollutants (HAPS)

Wide Opening for Effortless Mounting of Substrates

Spot Black can be printed in long runs without drying in the screen