Navico 9-Pin Transducer Extension Cable - 3m / 10ft

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Navico 9-Pin Transducer Extension Cable - 3m / 10ftThe 10 foot StructureScan transducer extension cable allows installers to extend the cable run for LSS 1, LSS HD, xSonic HDI, ForwardScan and TotalScan transducers.

1 inch) Weight: 1 kg (2

(Brass Nickel Plated ) 4 x 10mm Turn buttons with two hole bases 4 x Eyelets 4 x Washers 8 x Stainless Steel Screws

it has an independent capstan for retrieval of a secondary rope/chain rode or to assist with docking procedures

The panel also makes it possible to switch the inverter on or off automatically through a 12/24 Volt auxiliary input

Bondloc B577-50ml Pipeseal thread sealant will seal all kinds of threaded connections

sailing associations and mooring contractors

Applications: Marine & Recreational Vehicles Electrical Specifications Reserve Capacity @ 25 A: 240 min Resistance: â‰¤30 mÎ© @ 50% SOC Efficiency: 99% Self Discharge: <3% per Month Maximum Batteries Connected in Series: 1 (Single Battery Only) Discharge Specifications Maximum Continuous Discharge Current: 100 Amps Recommended Maximum Discharge Current: 800 Amps Lithium Marine Cranking Amp (MCA) Rating: Up to 800 Amps for 8 seconds @ 20Â°F (-6

Replaces Volvo 3841427

Ultraflex 32773D connection kit K23 for C14

62") *Both banks must be the same voltage

50210-1101

made of glass-reinforced Marelon polymer

Exchange/Return Notes