LSU4.2 WBO2 Wideband Sensor Extension Cable (2ft) Fiberglass Loom

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

LSU4.2 WBO2 Wideband Sensor Extension Cable (2ft) Fiberglass LoomThis is a 2ft extension for the Bosch LSU4. 2 sensors, such as 17014. This sensor is used in MANY aftermarket wideband sensor controllers. This is perfect if you need a little extra length in case your sensor is far away from the firewall access hole. This is a common issue with some applications that has the sensor a long way from the ECU and firewall access. 2ft length with fiberglass wire loom and rubber boot at both ends, as pictured. Made with

See also (click the following lines): Genboard / VEMS Round Wideband and EGT display

An (LM1815) VR to HALL interface and a (HC4024) counter chip in a small DSUB9 connector housing

1/8 NPT Thread

takes a bit more time to deliver

Wideband controller (inside ECU) and wideband sensor is already pre-calibrated to the ECU and included

Manifold Pressure through a choice of built-in pressure sensors

Ignite Yellow E98: For straight ethanol applications

This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology

conversion to triple-HALL input (for new VVTI camshaft-angle-control applications) etc

Over 3 years of pushing the stock motor and current fuel system to the absolute limit and the car hasn’t skipped a beat 👍

This is a 2ft extension for the Bosch LSU4

Normally the divided output is only useful for wheelspeed signal