Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

DSX FLEX FUEL KIT FOR 2005-2006 GTOThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV Gen V GM V8 vehicles. Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup. Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content

YOU ARE LIMITED TO 58PSI RAIL PRESSURE

and the one piece billet tee fitting is a true push connect piece made exclusively for this application

The dry sump configuration is identical side to side and does not contain a fill port or dipstick mount

Gone are the days of needing to hack up the airflow modeling and skew torque to get things back to semi-functional state

Partial fuel cut

**Note: Vehicles using GM factory valve covers may have to make adjustments to the drivers front PCV breather hose/port

so you will need to use VCM Editor as a bare minimum to patch and reflash the ECU

DSX Tuning 3D printed fuel line disconnect

Because of the operating method

all hose kits provide a single #8AN inlet fitting located just above the vehicle’s High Pressure Fuel Pump

Factory Check Valve Removal Option:

The pump is activated any time the ECM commands 500kPa or higher fuel pressure and features a soft start function meaning the pump is not immediately commanded to full duty cycle and consequently results in a much smaller spike in fuel pressure

Exchange/Return Notes