Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Time Mark 261-DXT-12061The Model 261 series Alternating Relay is designed for duplex pumping systems where it is desirable to equalize pump run time. The solid state alternating circuit drives an internal electromechanical relay. A continuous power source and control switch are required. The control switch (float, pressure or other isolated contact) is connected between the L1 terminal and the control terminal. Each time the control switch is opened the output contacts

A Time Mark Model 650 Loop Power Supply (or equivalent) is required to provide the 24 VDC operating voltage

Model 15-240 Nominal voltage (phase to phase) 240VAC Operating range ± 10% Frequency 50 to 60Hz Power consumption 2W per phase Transient protection 2500V for 10ms Repeat accuracy ± 0

HIGH-STRENGTH DESIGN: Made from a Poly/Dyneema blend with a 450 lb break strength

662917007277

Matching transformers are available to extend the use of the monitor to most any range

276B-1200 UPC Code

For use with fiberglass rod measuring 1/4 inch in diameter

refer to typical application

98048003 Brand

the HIGH ADJUST

Install Fiber Cable 50% Faster - Save Time with Rapid Installation - Designed for Quick and Efficient Use

The Model 25 True RMS 3-Phase Monitor can be either calibrated using a True RMS Voltmeter or can be restored to factory defaults in the field

Exchange/Return Notes