Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

3Mtr D300 Angle FilletThe TuffStuff Long Leg Angle Fillet is used to create a join between the roof deck and an adjoining wall or parapet that is of non standard brickwork construction. The Angle Fillet should only be fixed to the roof deck. It must not be fixed to the wall. This allows for natural movement expansion to take place without causing damage. Joins in the Angle fillet should be overlapped and sealed with trim adhesive. CSM Bandage should then be applied.

It is essential that cans are stirred thoroughly prior to use

Weight | 1

The TuffStuffÂ® Standard Drip Trim is for use on roof edges that need to run off into guttering

Clear Opening: 450mm Diameter

to maximum depth of 0

Soffit engages by push fit

Dental Practices

to meet required load rating

The pre-formed 68mm outlet is a fast

PLEASE NOTE: If using multiple tins for the same roof make sure they are mixed together to avoid the chance of noticeable colour variations

When joining two pieces of DPC they should be lapped over each other by at least 100mm

pre-moulded EPDM flashings with pre-applied Seam Tape to the base and a stainless steel clamping ring