STANLEY HYDRAULIC SUBMERSIBLE PUMP SM50100

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

STANLEY HYDRAULIC SUBMERSIBLE PUMP SM50100Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50100 pump discharges an impressive 500 gallons per minute (1890 lpm) while it's small size allows it to fit in a box 11 inches deep by 10 inches square (26. 7 cm x 25. 4 cm). Features: 4 9 gpm (15 34 lpm) operating range. Stainless steel, steel, urethane, or cast iron impellers (model dependent). Submersible (no priming required) Able to run dry without damage. 3 8 inch

1) DCB115 Charger

This lightweight tool can tear down concrete or brick walls

Output capacity: 2 each 5 or 8 gpm / 20 or 30 lpmPressure: 2000 psi / 140 barCircuit type: Open centerHydraulic reservoir capacity: 3

Double acting means hydraulically advancing the ram to build the proper tonnage|then the hydraulic pressure is reversed to retract the ram

This high volume

The Matweld Spike Driver is equipped with torsion dampened handles which reduce the vibration level to a minimum

23 in: / 58

Uses U dies

Dies not listed can be made to specification

pier and dock timbers

The floating trigger design requires minimal pressure across any part of its surface to engage the tool

Input Flow Range: 4-12 gpm (15-45 lpm) at the commercial diver