PM5 VAG CANBus Gateway PnP Adapter - Standard Length

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

PM5 VAG CANBus Gateway PnP Adapter - Standard LengthPlug n Play solution for obtaining RPM and Boost directly from the vehicle's CANBus Gateway located under the dash directly above the steering wheel universal joint. Compatible with 2016+ Audi A3 S3 RS3 and Mk7 Golf GTI, Golf R models. Boost readings can be used to progressively raise or lower the pump voltage via the optional integrated voltage booster, which allows for obtaining the maximum pump output at peak engine loading without permanently

anti-siphon solenoids

Data-Logging and Log Visualization functions

Fuel Sender Top Hat (White): 8K0 919 051 G

In setups where this 5s delay may not be desirable (such as all VW/Audi cars where the factory ECU needs to be able to operate the pump any time including when the vehicle is off in order to prime the fuel system) the IGN input may be permanently tied to a fused

Pump duty can be based on just RPM or just boost

Sensor Linear Transfer Function:

Intercept: 342

25" (127mm x 89mm x 32mm) Weight (Kit) 10 lb Operating Temperature -40°C to +85°C (-40°F to +185°F) PM4 Factory Configuration Files

This will ensure the PM5 can operate the pump immediately when the ECU control signal is received

Manual Crimper (Molex) 2002188600

They also usually have only a single channel for driving an optional anti-siphon on/off solenoid valve

raising the pump voltage as a step when a certain 0-5V reference voltage threshold is exceeded

Exchange/Return Notes