Negative Spring Damper Compression Tool | Counter-Measure

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Negative Spring Damper Compression Tool | Counter-MeasureNegative Spring Compression Tool Simple and strong tool to compress the sealhead when working on shocks with a negative spring. What This Tool Does This tool pushes the negative spring against the sealhead so you can set the shock correctly. Lets you set the correct IFP depth from the service manual Prevents the shaft from moving after pressurization Avoids incorrect oil volume and damper imbalance Without compressing the negative spring, the shaft

It uses a large 1/2" shaft and a monotube design

do not shock-load the clamp

⚠️ Warnings & limitations Torque limit: ~1

If you ovalize it

Needle Air Fill Guide

Topaz Gen 1 & Gen 2 : 10 mm shaft

Tools Included in Our Kit 1/2″ Shaft Clamp — fits the main shaft on this shock

Poor bleed = no damping

Required for Cane Creek DB Inline Air Can & Bladder Wrench

Securely clamps the reservoir / piggyback

Subtract 5 mm from this measurement

Sit ~5–6 mm above the rebound rod for safe hammering