Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

GEN IV LS HALTECH WIRING HARNESSSelect your application from the drop down menu This is a custom made wiring harness specifically designed for standalone LS jetboat applications and HALTECH ELITE 2500 ECU These harnesses are locally made here in NZ with the best parts and quality control As standard these are to suit a reversed intake manifold and manual throttle body. All sender wires for gauges plus alternator & starter wiring are included . Includes provisions for plug and play

High quality bush that the steering and forward/reverse shafts run through on our 178 jet units

a bearing housing breather and optional reverse brake system with cable mount which locks off the reverse bucket at any position until there is input from the reverse control

Large trim nozzle best suited to single stage 770 series hamilton jet units

high quality grill with high tensile wear plate bars

This stepped key coupled with the sleeve suits original Colorado junior 1" main shafts

Very high quality dual reverse and trim control set up for 40 series reverse that locks over center in the forward position and 30 series trim with detent and indexing lever

This also features a cut out to allow for your trim cable

These bearings feature a dense outer case structure of engineered reinforced thermo plastic for rigidity and fit

Product may vary slightly from shown

Rubber gasket for the intake base of 770 and 750 series Hamilton jet units

Cast bronze steering knuckle to suit our trim nozzle for 750 series hamilton jet units

Exchange/Return Notes