NVIDIA/Mellanox MCP7Y70-H001 Compatible DAC 1m (3ft) 400Gb/s OSFP to 4x100Gb/s QSFP56 InfiniBand HDR Passive Copper Splitter Cable

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

NVIDIA/Mellanox MCP7Y70-H001 Compatible DAC 1m (3ft) 400Gb/s OSFP to 4x100Gb/s QSFP56 InfiniBand HDR Passive Copper Splitter CableDescription NADDOD O4Q56 400G CU1H is a passive Direct Attach Copper (DAC) cable with an OSFP based twin port 2x 200Gb s connector to four QSFP56. DAC cables are the lowest cost, lowest latency, near zero power consuming, high speed links available due to their simplicity of design and minimal components. Main use is linking Quantum 2 NDR InfiniBand switches to HDR100 switches, ConnectX 6 7 adapters, and or BlueField 2 3 DPUs.

It supports 2x800G DR4 transmission over eight parallel single-mode fibers

6T-2FR4FH integrates Silicon Photonics chips and the Broadcom 3nm Sian3 (BCM83628) DSP to deliver 1

ACC is a active DAC with a pre-emphasis equalizer IC included in each end

NADDOD offers Mellanox MCP1650-H00AE30 compatible 0

The cables offer communication between devices employing QSFP ports and adhere to SFF-8436 requirements

The two 400G ends support 4-channels of 50G-PAM4 (200GbE/HDR) and use a flat top QSFP56 for use in Quantum switch cages

Built with OM4 multimode fiber and Type B polarity

The four 200G ends support 2-channels of 100G-PAM4 (200G) and use a flat top QSFP112 for use in ConnectX-7 adapters and BlueField-3 DPUs using riding heat sinks on the connector cage

25Gb/s optical signals

NADDOD OSFP-800G-CU2FH is a 2x400Gb/s twin-port OSFP (Octal Small Formfactor Pluggable) Flat Top to 2x400Gb/s twin-port OSFP Flat Top Direct Attached Copper cable (DAC)

6Tb/s twin-port OSFP224 optical transceiver compatible with NVIDIA/Mellanox MMS4A00-XM-FLT (980-9IAH0-00XM00)

and configurability

Exchange/Return Notes