Fox Float X2 / DHX2 (2026+) Mid-Valve Torque Socket

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Fox Float X2 / DHX2 (2026+) Mid-Valve Torque SocketX2 DHX2 (2026+) Mid Valve Torque Socket A dedicated chamferless socket for the mid valve nut on 2026+ Fox Float X2 and DHX2 (Monotube platform). Designed to enable precise 9 Nm torque application using a 3 8" torque wrench or a lugage scale setup with zero chance of damaging the shock. Important Compatibility Info Designed for Fox Float X2 and DHX2 (2026+ Monotube shocks). Fits the mid valve nut interface. Standard 20 mm sockets can work, but are

hold two of the three handles

Isopropyl alcohol + clean towels

and everyday bikeshop use

Also used on: many Cane Creek Inline Air and DB Inline Coil (depending on the fill-port design)

A single layer of paper towel adds grip and reduces required vise force

The dedicated clamp kit for RockShox Reverb dropper posts

Safety & Disclaimers Never clamp a damper shaft directly without the correct clamp diameter

After the first installation

M5 IFP Puller

This kit covers both models

Air Shaft Service: Remove old grease fully

Don’t open GRIP2/VVC mid-valve unless you know shim/float tuning